Tutorial

Opening The Realme 7i: A Step-by-Step Guide




Safety Precautions

Before we delve into the disassembly process, let’s address some crucial safety precautions.

realme i disassembly / realme rmx disassembly / realme
realme i disassembly / realme rmx disassembly / realme

Power off your device: This is absolutely essential to prevent electrical shorts or damage to internal components during disassembly.

  • Gather the right tools: You’ll need a set of prying tools (plastic spudgers are recommended to avoid scratching the phone’s body), a hairdryer or heat gun, and a small Phillips screwdriver (if applicable).
  • Create a clean work area: Find a clean, well-lit workspace free of clutter to minimize the risk of losing small parts or damaging your phone due to dust or debris.
  • Take photos for reference: Snapping pictures of the phone’s internals before disassembly can be immensely helpful during reassembly, especially if you’re unfamiliar with smartphone repair.

  • Understanding the Realme 7i’s Construction

    The Realme 7i features a back cover made of plastic that’s secured to the phone’s frame with adhesive. Beneath the back cover lies the phone’s motherboard, battery, cameras, display cables, and other internal components.

    Heating the Back Cover

    The first step involves softening the adhesive holding the back cover in place. Apply heat from a hairdryer or heat gun to the back cover, focusing on the edges and corners. It’s important to maintain a moderate temperature to avoid damaging the phone’s internal components. Only enough heat is necessary to slightly soften the adhesive.

    Prying Open the Back Cover

    Once the adhesive has softened, carefully insert a plastic prying tool between the back cover and the frame. It’s recommended to start at a corner, creating a small gap. Once you have a starting point, slowly slide the prying tool around the perimeter of the back cover, gradually separating it from the frame. Be cautious and avoid applying excessive force, which could crack the back cover.

    Removing the Back Cover

    After separating the back cover along most of the edges, gently lift it from the frame. There might be additional adhesive holding the cover in specific areas, so be mindful and use the prying tool to carefully detach those sections. Once the back cover is fully detached, place it in a safe spot to avoid scratching or damaging it.

    Note: The following steps will involve disconnecting cables and removing screws. Pay close attention to the placement and orientation of these components, as they’ll need to be reassembled in the exact same way.

    Related Articles

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Back to top button