Tutorial

How To Open The Back Panel Of A Realme 3




Safety Precautions Before Opening Your Realme 3

Power Down and Remove Everything

Realme  Pro Teardown & Disassemble  Remove & Replacement all Internal  Parts  Open Back Cover Pro
Realme Pro Teardown & Disassemble Remove & Replacement all Internal Parts Open Back Cover Pro

Before embarking on any disassembly process, it’s crucial to power down your realme 3 completely. This eliminates the risk of electrical shorts or data loss during the procedure. Additionally, remove any external accessories like cases, screen protectors, and memory cards. These can hinder the removal of the back cover and might get damaged in the process.

Gather the Necessary Tools

How to Open Realme  Back Panel and Battery Disconnect  Realme   Disassembly / Teardown
How to Open Realme Back Panel and Battery Disconnect Realme Disassembly / Teardown

To open your realme 3 safely, you’ll need a few essential tools. A prying tool, such as a spudger or a guitar pick, is vital for gently prying open the back cover without scratching the phone’s frame. A set of precision screwdrivers, including a Phillips head and a Torx screwdriver, will be necessary for removing the internal screws. If you don’t have a dedicated electronics repair toolkit, you can find affordable options online or at electronics stores.

Opening the Realme 3 Back Cover

Realme  Disassembly - Realme  Teardown  How to Open Realme  - All  internal Parts of Realme
Realme Disassembly – Realme Teardown How to Open Realme – All internal Parts of Realme

Locate the Release Points

The realme 3 features a back cover secured by clips around the edges. To initiate the opening process, identify the seam between the back cover and the phone’s frame. This seam usually runs along the entire perimeter of the device.

Applying Pressure with the Prying Tool

Insert the prying tool, preferably a spudger, into the seam at a corner of the phone. Be very gentle and avoid using excessive force, as this can damage the clips or scratch the frame. Pry the tool slightly to create a small gap between the back cover and the frame.

Working Around the Perimeter

Once you’ve created a small opening, carefully slide the prying tool along the seam, prying it open a little at a time. Move slowly and meticulously around the entire perimeter of the phone, ensuring all the clips are disengaged. Be mindful of any cables or buttons that might be connected to the back cover and avoid putting pressure on them.

Removing the Back Cover

Double-Check for Secure Clips

After going around the entire perimeter, gently lift the back cover. However, before completely removing it, perform a final check to ensure all the clips are disengaged. A loose clip can cause the back cover to pop back into place unexpectedly, potentially causing damage.

Disconnecting the Fingerprint Sensor Cable (Optional)

Some variants of the realme 3 might have a fingerprint sensor cable connecting the back cover to the motherboard. If you encounter this cable, locate the connector and carefully disconnect it with your fingers. Don’t pull on the cable itself, as this can damage it.

Accessing the Realme 3’s Internals

The Battery Compartment

With the back cover removed, you’ll now have access to the realme 3’s internals. The most prominent component you’ll see is the battery. It will likely be secured with adhesive strips and possibly some screws.

Other Internal Components

Beneath the battery, you’ll find the motherboard, which houses the phone’s processor, RAM, and other essential components. The camera modules, speaker, and vibration motor will also be visible within the phone’s frame.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button